The specialized open asymmetric container 4 m3 for construction waste is designed for collection and storage of construction waste. The construction of the container is made with axes for emptying the container and one-sided grip according to DIN 30735. The container is ribbed with cold-bent profiles for higher strength and load capacity. They can be stacked into each other and serviced by specialized machines. The container is bilaterally primed and unilaterally painted in a color desired by the customer.

It is made of sheet metal S235JR with the following thicknesses:

  • bottom sheet thickness: 4 mm,
  • sheet thickness of the walls: 3 mm,
  • thickness of the sheet metal of the reinforcing profiles: 3 mm.

The profiles have the following dimensions:

  • Reinforcing profiles around the opening of the container: 40x50 mm
  • Axles for lifting the container: 4 pieces F30 mm
  • Limiting plates of the axles: b = 8 mm
  • Vertical profiles on the wall, bearing the axes for lifting the container: 40x80 mm
  • Side angles: 90x50x5 mm
  • Axle for turning the container: F30х186 mm
  • Ribs for gripping the turning axle: 2 pieces b = 8 mm, welded to the front of the container
  • Additional reinforcement of the unit with the turning axis inside the container


  • Length: 2414 mm, basket: 2351 mm
  • Width: 1874 mm, basket: 1720 mm
  • Height: 1250 mm
  • Net weight: 335 kg.


The container can be made of sheet metal with different thickness of the bottom, profiles and sides to meet the special needs of the client.

"Гафуров Сервиз" ЕООД